Easy-STAT1X

The Easy-STAT1X line is designed to provide the lowest cost solution possible. All versions come with full RS232 interface, and offer the following options:
  • IOBus networking functionality
  • Gruner motor communication
  • Physical hardware inputs and outputs

Available Easy-STAT1X Versions

Easy-STAT13 The simplest Easy-STAT model that Walker offers. Control is based on an internal temperature sensor and a fixed setpoint. Configuration and setpoint modification are available through the RS232 interface. Inputs/Outputs are optional; see available options outlined below. Connections are made through a 6 pin terminal strip.
Easy-STAT14 Offers the same hardware as the Easy-STAT13, with a ribbon cable for connection to terminal boards, and 3 additional universal inputs for thermistors or voltage input.
Easy-STAT15 Offers the same hardware as the Easy-STAT13, with RJ45 connector(s) for connection to terminal boards, and 3 additional universal inputs for thermistors or voltage input.

Easy-STAT1X Options

_KF Provides a potentiometer setpoint knob in fahrenheit.
_KC Provides a potentiometer setpoint knob in celsius.
_B Provides 1 push button with LED status indication.
_0 Provides 3 jumper selectable output configurations, which can be configured in any of the following ways:
  • 0 universal outputs, 3 relays
  • 1 universal output, 2 relays
  • 2 universal outputs, 1 relay
_IT Provides the Easy-STAT13 configuration with 3 additional inputs for thermistors or voltage input. Connection to these inputs is made through a 4 pin terminal strip for terminations.
_OT Provides 3 jumper selectable output configurations. This option comes with a 4 pin terminal strip for terminations.
_WC Provides a Warmer/Cooler label sticker for the setpoint potentiometer.

Example Easy-STAT1X Configurations

Easy-STAT13_KC_B_OT An Easy-STAT13 with potentiometer setpoint knob in degrees celsius, 1 push button with LED status indication, 3 jumper selectable output configurations, and connection via terminal strips.
Easy-STAT15_KC_B_O An Easy-STAT15 with 1 push button with LED status indication, 3 additional universal inputs for thermistors or voltage input, 3 jumper selectable output configurations, and connection via RJ45 connector(s) to terminal board (requires external terminal board).